|
|
|
|
2 “Crystal Innovations” silver earring components with light
sapphire Swarovski®
crystals
12 light sapphire 4mm Swarovski® crystal bicone beads
4 light sapphire 6mm Swarovski® crystal bicone beads
2 light sapphire 8mm Swarovski® crystal bicone beads
2 silver ear wires
8 silver head pins
Beadalon® round nose pliers
Beadalon® chain nose pliers
Beadalon® wire cutters
1. Attach an ear wire to the upper loop on an earring component.
2. String three 4mm beads onto separate head pins. Use round nose pliers
to make a loop above each one. Cut off any extra wire.
3. Attach one beaded head pin from Step 2 to each loop inside the teardrop
on the earring component.
4. String a 6mm bead and a 4mm bead onto a head pin. Make a loop and attach
it to the outer loop on the earring component.
5. Repeat Step 4 to attach a beaded head pin to the other outer loop.
6. String an 8mm bead and three 4mm beads onto a head pin. Make a loop
and attach it to the center loop on the earring component.
7. String a 6mm bead and two 4mm beads onto a head pin. Make a loop and
attach it one of the remaining empty loops.
8. Repeat Step 7.
|
|
|