Single Strand Bangle Bracelet
8 Crystal Innovations one-hole sliders with tanzanite Swarovski®
crystals
8 tanzanite 8mm Swarovski® crystal donut beads
16 violet opal 6mm Swarovski® crystal donut beads
Beadalon® large bracelet Remembrance memory wire
Beadalon® memory wire shears
Beadfix® glue
1. Cut one loop of memory wire with the ends overlapping by about ¼”.
2. String a slider, a violet opal crystal, a tanzanite crystal and a violet
opal crystal onto the wire.
3. Repeat the beading pattern from Step 2 until all of the beads are strung.
4. Glue the wire ends inside the slider.
Double Strand Bangle Bracelet
8 Crystal Innovations one-hole sliders with tanzanite Swarovski®
crystals
8 tanzanite 8mm Swarovski® crystal donut beads
16 violet opal 6mm Swarovski® crystal donut beads
Beadalon® large bracelet Remembrance memory wire
Beadalon® memory wire shears
Beadalon® round nose pliers
1. Cut two loops of memory wire with the ends overlapping by about 1”.
2. Use round nose pliers to make a loop on one end of each bracelet wire.
3. Pass a wire through a hole on the slider so the loop is inside the
back of the slider. Repeat for the other wire.
4. Pass a wire through a 4mm bead, 6mm bead and 4mm bead and one set of
holes on a slider. Repeat for the other wire, passing it through the other
set of holes on a slider.
5. Repeat the beading pattern from Step 4 until the bracelet is the desired
length.
6. Pass each wire end through a beginning loop on the back of the first
slider. Use round nose pliers to bend each wire end in a loop to connect
the ends of the bracelet.
|