602-1
Stamped Clay and Pewter Pendant
Designed by: Linda Peterson

Sponsor: American Art Clay Company (AMACO® Inc.)

 

For more information visit
click to close this project window
click to print this project window

Material needed

AMACO® Inc Products:
ArtEmboss Pewter Metal
Fimo® Soft Clay:
Indian Red
Translucent
Beveled Edge Cutters – Large Set (square)
Pasta Machine
Acrylic Paint: Burnt Umber
Double Stick Tape
Whiteboard (FiberMark Paper)
Rubber stamp or texture of choice
Scissors

Instructions:

Clay Pendant: Flatten clay to the thickest setting on pasta machine. Texture with rubber stamp. Cut out with large square beveled cutter. Bake square for 20 minutes at 265 degrees.

After cooled, antique with brown acrylic paint. Wipe off excess. Let dry. Apply double stick tape to back side.

Metal Pendant. Cut a 1 5/8 square from cardstock. Apply tape to one side. Remove backing. to expose adhesive. Apply to metal and cut out leaving a ¼” border around all edges.

Clip the corners diagonally. Fold metal to back side and set down with wooden stylus.

Bezel: Tape two pieces of metal together for a double thickness. Lay pattern on metal and trace around with stylus. Cut out. Apply tape to front and back of one tab.
Remove backing on tape and fold around stylus. Center bezel on back of metal pendant and press.


Template for bezel

Apply tape to entire back side. Lay onto metal and cut out close to edges. Soften edges by rubbing with stylus.

Add to favorite cording or chain.

Project Images  

 

click to close this project window
click to print this project window